MDB

The MDB is a mains distribution block with ethernet interface. It supports three mains groups of three sockets each. Two of these groups can be switched on/off independently using a webbrowser or telnet. The third group is implemented as a 'always-on' group and cannot be controlled over the ethernet interface.

(click on pictures to enlarge)

Specifications

Hardware

• Dimensions: 650 x 70 x 45 mm

• Mains sockets: total of 9, type 'schuko', 230V/16A max

• Max overall switching capacity: 3500W

• Main on/off switch

• Mains cable: type=3G1.5, length=meter, plug=schuko

• Signaling LED for indicating power status of switch module.

• Two signaling LEDs for indicating switch status of switch able groups.

• Ethernet interface (RJ45, 10 MB) with signaling LEDs for ethernet status and data traffic

Software

• Special MDB application that allows for switching mains groups using telnet client or webbrowser

• Configuration of MDB using telnet client

• Software updates using FTP client

Currently the MDB is a prototype/demonstration product and it is used by Necoso engineers for controlling appliances at remote test sites. It has not been developed into an approved, official, product and therefore is not commercially available for customers yet. However, we might consider turning it into a real product if market demand allows for it. So please contact us if you are interested in this product. (batches of at least 100 pcs and up)

[ Home ] [ Up ] [ Next ]

Necoso, Het Kasteel 315, 7325 PE Apeldoorn, The Netherlands
Phone: +31 (0)55-3601410, fax +31 (0)84-7246122

Copyright © 2003-2013 Necoso - All rights reserved.

Last updated:07-jan-2013